Sherpa 2 Plate Test Lane

The plate brake tester is ideal for:

the universal, fast and thus economical incoming inspection

of all-wheel drive vehicles

and lowered vehicle

Approved for the HU according to § 29 StVZO also beyond the year 2020.

The test panels can be pinned to the floor "above ground", or embedded with the frame in the floor "underfloor".

The vehicle is checked by ascending and braking on "sensory" test plates.

For the official HU examination in Germany, the vehicle must have an ascent speed of at least 8 km / h and max. 12 km / h, wherein the mean tangential thrust force is measured by braking at about 5 km / h. In addition, the ASA livestream is required for the HU examination - according to Rili 10/2011.

The speed measurement is carried out by a radar sensor, which is installed in the display.

Delivery:

• 2 x test segment hot-dip galvanized
• 1 speed measuring device integrated in test segment
• 2 x load cells
• 1 x sensor box
• 1 x electronics box with LAN interface and ASA livestream according to Rili 10/2011
• 1 x 32 inch digital display FULL HD
• 15 m pre-wiring

Additionally required (please indicate your choice when ordering!):

• Mounting set "overground" or
• Mounting set "underfloor"

The mounting variants can also be equipped with a track plate.

When installing "underfloor" with lane, please note the installation plan.

Optionally available:

• remote control
• printer
• Pedal force takers